Instructions For Use
Anesthesia Masks
General Uses
PRIMAFORM™ and PRIMAFORM™ Grip Anesthesia masks are intended for the transmission of medical gases to patients. The masks are to be worn over the mouth and nose of the patient to allow delivery of the required gases. PRIMAFORM™ and PRIMAFORM™ Grip masks come in various sizes to fit different user populations.
Best Practices
- Single patient use only, do not reuse
- Do not clean or sterilize as it may compromise the integrity of the product.
- Do not over inflate or use excessive pressure when applying the mask.
- Do not attach mask to any connection size that is not compatible. Please refer to connection sizing indicated on the product.
- The effect of “dead space” in an anesthesia mask on patient ventilation should be evaluated on an individual basis.
Shelf Life and Storage
- It is recommended the product be stored in a cool, dry environment; however, room temperature storage of this product is also acceptable.
- Although individually packed, product is supplied non-sterile. Do not use if the packaging has been compromised.
- All PRIMAFORM™ and PRIMAFORM™ Grip Anesthesia Masks have an expiry date on the packaging. Do not use the product if it is past expiry.
Instructions for Use
Note: To be administered by a trained/licensed practitioner
- Select size of mask based on the patient, then remove mask from bag.
- Check the mask for leaks in the air cushion.
- Examine the seal and fit of the mask on patients’ face. Use a syringe to inflate or deflate the cuff if required.
- Secure mask to patient. If the hook ring is not required, you should remove it and dispose of it appropriately.
- Attach corresponding attachments (i.e., anesthesia system) as per sizing and hospital practices.
- This mask is a single-use product. Please dispose of after use, according to your hospital’s policies.
questions
FAQs
How do I know if I have the right size of anesthesia mask for my patient?
Is there a reason anesthesia masks are transparent?
The air cushion doesn’t seem to be inflated quite enough for my patient. What can be done about this?
What are the coloured hook rings used for around the connection port?
What health standards should my single-use anesthesia mask meet?
When should I dispose of the anesthesia mask?
Why are PRIMAFORM anesthesia masks, hook rings and packaging different colours?
Why are there ridges along the dome of the anesthesia mask?
Why should I choose a "single-use" anesthesia mask over a traditional reusable mask?
Related Resources
Instructions For Use
Self Adherent Wraps
Proper use instructions for Self Adherent Wraps.
Instructions For Use
Tray Liner
Tray Liner Instructions for Use
Instructions For Use
Skin Closure Strips
Skin Closure Strips - instructions for use